There are no reported issues with this Twinpower and therefore this should be a straight forward strip, clean and reassembly.
Stock standard since new, served the owner very well and have racked up many catches over the past few years. |
Knob bearings are still smooth but well used. Thoroughly flushed and contact cleaned for a new packing of marine grease for long life performance. |
Packed to the brim, redundant marine grease spread over the bearing within the knob to act as a seal when installed. |
Drags are in excellent condition with no loss of drag power even after years of usage and never over loaded when fighting fish. |
A combination of carbon and hyper-disc drag material for the drag system. No lack of power and efficient for sure. |
Thoroughly degreased and surface contact cleaned ready for a new layer of drag grease. |
Drag housing too needs to be degreased and contact cleaned to avoid mixture of incompatible greases. |
Line roller's dry but smooth. Quality stuff unlike the latest S-ARB bearings that somehow just doesn't last. |
Flushed, contact cleaned and newly packed with marine grease for long life performance too. |
The entire line roller system is packed to the brim behaving like a water tight seal. |
Never been opened before, grease have been injected into the service port and doesn't get anywhere beyond a few splatter on the back of the main gear. |
Old grease removed and contact cleaned the entire inside of the crank case. A new layer of Shimano's heavy grease applied on all exposed surfaces for protection. |
Good as new, ready for more high speed chase when the speedsters are in. |
No comments:
Post a Comment